Upravit stránku

Clamping heads

An effort to eliminate a possibility of machine tool or infeed gantry damage caused by means of infeed of improper part kind or by clamping the part at faulty location is obvious. To eliminate such possible causes of served equipment failures, it is designed, as per needs, a springing of clamps with actual position control, recognition of actually clamped part and inspection of part proper positioning when camped.

The clamping heads are designed equipped with a clamp jig. A higher part weight is presumed. The head can turn around a vertical axis through 90° or 180°. The Schunk company origin clamp jigs are used for standard sorts of rotating pars of shaft shape. The Aktivit company designs the clamping heads for special applications of part clamping or positioning.The construction of each clamping head is done with respect to highest achievable reliability and safety from the point of view of the machine tool. An effort to eliminate a possibility of machine tool or infeed gantry damage caused by means of infeed of improper part kind or by clamping the part at faulty location is obvious.

 To eliminate such possible causes of equipment failures, it is designed, as per needs, a springing of clamps with actual position control, recognition of actually clamped part and inspection of part proper positioning when camped.

The full range of clamping jaw versions covers all requirements on clamping that also respect special conditions that would be e.g. elimination of any damage of finally machined surface, assurance of extremely accurate alignment of part and machine spindle or extreme high accuracy of repeated clamping.

The clamping systems with sprung jaws, with plastic and rubber lining of jaws or with underpressure clamping jaws has been successfully developed and tested.

Nahoru